How to Check a Hotel or Airbnb for Hidden Cameras

How to Check a Hotel or Airbnb for Hidden Cameras

Checking a hotel or Airbnb for hidden cameras

Staying somewhere new should feel exciting, not unsettling. For solo female travellers especially, doing a quick privacy and safety check when you arrive can provide some extra peace of mind.

Hidden cameras can be difficult to spot, but there are several simple things you can check before settling into your room.

1. Start with a visual check

Look around areas where someone could reasonably capture private activity, especially the bedroom and bathroom.

Pay attention to unfamiliar or oddly positioned objects such as clocks, chargers, smoke detectors, power adapters and other small electronics. Look for tiny openings or anything that seems out of place.

2. Turn off the lights and look for camera lenses

A small camera lens may reflect light when viewed from the right angle.

A hidden-camera detector with a lens-finding light can make this easier. Slowly scan suspicious objects while looking through or alongside the detector as directed by its instructions. A camera lens may appear as a small reflected point of light.

3. Check for infrared night-vision cameras

Some cameras use infrared light for night vision. Certain detectors include an infrared scanning mode designed to help identify these cameras in a darkened room.

Keep in mind that not every camera uses infrared, and other electronic devices can also produce infrared light.

4. Check for wireless signals

Some hidden cameras transmit information wirelessly. An RF or wireless-signal detector may help locate an actively transmitting device.

However, these detectors can also react to perfectly ordinary electronics such as phones, routers and other wireless devices. A camera that isn't transmitting at the time of your search may not be detected this way.

What we learned from testing one ourselves

At Navia Path, we test products ourselves whenever we can before recommending them.

Our detector includes several different detection methods rather than relying on one type of scan. One thing became very clear during testing: knowing which mode you're using matters.

Wireless detection, infrared detection, lens reflection and magnetic detection are designed to find different things. No single mode can tell you that a room is completely camera-free.

That's why we think a detector should be used as one part of a room-safety check — not a guarantee.

A simple routine when you arrive

Take a few minutes before unpacking to visually inspect the room, check suspicious electronics and scan areas where privacy matters most.

If you find something that genuinely concerns you, don't tamper with it. Document what you've found and contact the accommodation provider or appropriate local authorities if necessary.

A few minutes of checking can help you settle in and get back to what you travelled for in the first place.